Free Standard delivery and free returns!

BMW 7 Series F01 / F01(LCI) / F02 / F02(LCI) / F04 Air Suspension Compressor


Please wait...

Please wait...

In Stock
Product Information
Package includes:
  • Compressor
  • Electrical Plug
  • Intake Hose Assembly
  • Relay
Weight: 5.0 kg
Aerosus Code: 164620
Model: 7 Series
Platform: F01, F01(LCI), F02, F02(LCI), F04
Original Equipment: 37206789450, 37206864215, 37206794465, 37206789165, 37206784137, 37206875176
Construction Year: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Product Description

The compressor of Aerosus is suitable for the air suspension of all BMW 7 Series F01 models produced from 2008 until 2012. In addition, it can also be easily installed in the long version, designated as F02, in the hybrid variant, designated as F03, and also in the armoured model of this 7 Series, designated as F04. In July 2012, the BMW 7 Series F01 received a facelift and the additional designation LCI. The compressors of the suspension were also revised in the course of this facelift. The compressor is supplied with the 5-PIN power relay, the intake manifold, the electrical connector and the Voss compressed air connection. You will find the relay in the spare wheel well in the boot, on the right side, at position K1 of your vehicle. The compressor is located in the middle position under the rear of the bumper.

Instructions for Installation of Our Compressor

Thanks to its modular design, the compressor can be divided into three main elements. This type of design makes the compressor robust and less prone to failure. The three components are the pressure housing, which is used for air compression, the electric motor, which provides the power drive of the compressor, and the air dryer unit, which dehumidifies the ambient air before it's fed to the compressed air system. If you don't want the installation and assembly of the compressor to be performed by a garage and want to fix the problem yourself, you should pay attention to an important note when installing. Before installing the Aerosus air suspension compressor, be sure to check the entire system for leaks and, if necessary, eliminate them. If only one air spring is leaking, this will eventually result in another compressor failure. Furthermore, the supplied power relay must be replaced each time the compressor is changed. If the vehicle lowers overnight on the rear axle, then the level control is defective.

Reasons for a Compressor Malfunction

Although compressors are considered to be extremely robust, they can eventually cease to provide the required amount of pressure. Therefore, it must be removed and replaced. The wear of an original BMW compressor can be significantly accelerated, particularly when there is a leak in the air suspension system or the level control has failed. A defect in the air suspension can be identified by the following features: the compressor runs too long, the vehicle lowers unilaterally at the back and is crooked or the level control doesn't pump up.

Advantages of a Compressor by Aerosus

First of all, it should be noted that when switching to an Aerosus compressor, all other assistance systems remain fully functional. As with all our car parts, the space-optimized Aerosus compressors for your BMW 7 Series F01, F02, F03, and F04 pass through expert control in Germany. This ensures the functionality and longevity of our products. All our compressors come with a two-year warranty, so you have peace of mind long after your purchase. In addition, you can benefit from our permanently low prices when you purchase online.


No questions asked yet

Customer Reviews
Write Review
We have no reviews about this product yet.
1 of 3
Read more
Read more
Read more
Air Suspension Compressor