BMW 5 F07/F11 Valve Block Replacement Guide

There’s a good chance the issue lies in your car’s air suspension system. After all, there’s a lot of things going on with your compressor. One of the most critical pieces being your valve block. And all it takes is a small leak or damage to lead to some massive problems. So, join us today as we take a look at how to replace your BMW 5 Series (F07/ F11) valve block.

Before we get started, let’s cover the big question on your mind.

In short, your valve block sends air from your compressor to your air springs/ struts. It also commands the amount of air that will enter each of your air bags in any road condition.

In other words, it’s integral to that BMW 5’s luxury ride. It’s also needed to ensure your car height sits at the right level.

Yet, things fall apart with time. Wear/ tear and rotting will cause leaks to your valve block. Let these issues persist, and soon your air compressor overworks and breaks as well. And that’s a replacement no one enjoys making. So, listen closely to your car, and replace your valve block the instant you notice any issues.

What you’ll need:

• A jack
• Wrench set
• Anti-seize spray
• Replacement valve block

What to do:

1. Remove your battery. Basic safety step. This will keep anything from powering on during the process which can cause injury to you or damage to your car.

2. Jack up/ raise your vehicle.Before starting this step, set your steering to straight ahead.

3. Remove the plastic cover in the bottom rear portion of your car.For this, a socket wrench is enough for removing the shroud.

4. Disconnect the 3 connectors on the valve block and air compressor. Then remove the rubber intake hose. Then remove the rubber intake hose.

5. Remove the airlines from the valve block. There’s a red, black, and blue line you’ll need to disconnect.

6. Unscrew the 4 nuts on your air compressor’s bracket. Use a socket wrench to make this step easier.

7. Remove your air compressor from your BMW 5 Series.

8. Disconnect the valve block. You’ll find 4 nuts securing the valve block in place. Use your wrench to remove them.

9. Install your new valve block.Again, use your wrench to secure the bolts in place. From here, you’re performing all the previous steps in reverse.

10. Reinstall your air compressor into its mounting bracket.

11. Insert your intake hose and reattach the red, blue and black air lines to your air compressor.

12. Reconnect the 3 electrical connectors to the valve block.

13. Reinstall your plastic protective cover on the bottom rear portion of your car.

14. Lower your vehicle. From here, you can safely reconnect your battery. Start your engine and wait a few minutes. This will give you a chance to ensure everything is working as it should.

Looking for a great price for an OEM-quality valve block?

Then visit AEROSUS. We have valve blocks (alongside a massive selection of other air suspension replacement parts) for your BMW 5 Series.

This is a replacement you won’t want to delay. After all, you owe it to yourself to enjoy that smooth luxury ride that only a BMW can offer. So, restore that smoothness from the day you drove your BMW off the lot and order your valve block today!